Re: (ASCEND) SOFTWARE UPGRADE KILLS RADIUS AUTHENTICATION???

["Jerry O'Brien" <jobrien@cuttingedge.net>]

I just set up a new Max and the same thing was happening. I set
Ethernet>Answer>PPP options>Recv Auth=PAP, and it worked like a charm.

At first.

Now I have many users getting disconnected with normal close codes after
about 1 minute connect time. Any ideas?


Jerry O'Brien
Network Administrator
Cutting Edge Systems, Inc.


----- Original Message -----
From: <ascend@digistar.com>
To: <ascend-users@bungi.com>
Sent: Tuesday, October 05, 1999 7:31 AM
Subject: (ASCEND) SOFTWARE UPGRADE KILLS RADIUS AUTHENTICATION???


>
> I recently upgraded two MAX 4048s from 6.1.7 to 7.0.0 to 7.0.3 and now
> radius authentication stops working after about 25 users are connected.
>
> The radius server sends an OK back to the MAX but the MAX reports "LAN
> security error" and drops the caller.  This is bad.  The radius logfile
> shows that user's password was correct and that the login was accepted -
> but the max reports LAN security error and drops the caller anyway.
>
> I reloaded 6.1.7 ftik.m40 onto the machines and the problem has grown
> worse.  Instead of about 28 users I now get only about 20 before the max
> starts reporting "LAN security error" and drops callers like flies.
>
> What can I do to remedy this problem?  I am losing customers already!
>
>
>
> My users file:
>
>
> DEFAULT Password = "UNIX"
>         User-Service = Framed-User,
>         Framed-Protocol = PPP,
>         Framed-Route = None,
>         Ascend-Maximum-Call-Duration = 1440,
>         Ascend-Idle-Limit = 1200
>
>
>
> pools -v shows plenty of available memory...  I don't know what else to
> do...
>
>
>
>
> Thanks!
>
> Jim
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>