Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX 4048 + 5.0Ap38 oddity
I have been having this problem as well. Since we switched to Brooks Fiber,
I thought that was the culprit.
We also use NFAS on two T1's, so that might be a contributing factor.
Does anyone have an open bug report on this problem?? I don't want to
report it to Ascend if it is already known.
At 10:13 AM 1/15/98 +0200, John Campbell wrote:
>I've been having the same problem since 5.0ap36. Every time I reset the MAX,
>I have to call the Telco to reset.
>
>John Campbell
>Hix Internet
>
>
>>
>>I've noticed something that's never happened with any other release...
>>
>>Resetting a MAX 4xxx with 5.0Ap38 causes the MAX to play havoc with the
>>remote telco switch if the CT1s are ESF/B8ZS.
>>
>>I can't remember the dozens of times I've reset a max with ESF/B8ZS lines
>>attached to it and seen the connections come right back up, however now...
>>when I reset a max loaded with 5.0Ap38 most of the channels do not come
>>back up and the switch throws half of the channels into "maintenance busy"
>>mode, requiring me to call the telco and have them manually reset the
>>channels. I'm wondering if the max goes into "factory" mode for a few
>>seconds (D4/AMI) before reading its internal configuration and then
>>returning to ESF/B8ZS, thus causing the switch to go into alarm...
>>
>>
>>--
>>
>> /
>> / o Jason Buchanan
>> o Digistar Microsystems
>> / jsb@digistar.com
>> o http://www.digistar.com/
>>
>>++ Ascend Users Mailing List ++
>>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
/------------------------------------------------------------------------\
| Michael Hyman Quickturn Design Systems |
| Manager, Information Technology Group 55 West Trimble Road |
| mhyman@quickturn.com San Jose, Ca. 95131 |
| (408) 914-6409 Voice (408) 914-6909 Fax |
| |
| "Out the 10Base-T, through the router, off the bridge, over the leased |
| line, past the firewall, down the T1...nothing but Net." |
\------------------------------------------------------------------------/
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: