Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX 4048 + 5.0Ap38 oddity
I've been having the same problem since 5.0ap36. Every time I reset the MAX,
I have to call the Telco to reset.
John Campbell
Hix Internet
>
>I've noticed something that's never happened with any other release...
>
>Resetting a MAX 4xxx with 5.0Ap38 causes the MAX to play havoc with the
>remote telco switch if the CT1s are ESF/B8ZS.
>
>I can't remember the dozens of times I've reset a max with ESF/B8ZS lines
>attached to it and seen the connections come right back up, however now...
>when I reset a max loaded with 5.0Ap38 most of the channels do not come
>back up and the switch throws half of the channels into "maintenance busy"
>mode, requiring me to call the telco and have them manually reset the
>channels. I'm wondering if the max goes into "factory" mode for a few
>seconds (D4/AMI) before reading its internal configuration and then
>returning to ESF/B8ZS, thus causing the switch to go into alarm...
>
>
>--
>
> /
> / o Jason Buchanan
> o Digistar Microsystems
> / jsb@digistar.com
> o http://www.digistar.com/
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: