Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Modem at Console Port of a Max/Pipeline?
William T Wilson sez:
> It should not be hard. There are two things you need to beware of,
> though. First, your modem must be set to auto answer! Some modems
> default to auto answer on, most don't. Some (not many) you can set with
> a jumper or a dip switch. If your modem is not set to auto answer, you
> must set it (usually with an AT command). It is also best to set your
Until your first power failure, when it will revert to the defaults...
i.e. -- it's best to get a modem with such a dip switch.....
--
A host is a host from coast to coast.................wb8foz@nrk.com
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: