Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Modem at Console Port of a Max/Pipeline?
Or save the configuration with an AT&W.
Alex P
On Mon, 12 Jan 1998, David Lesher wrote:
> William T Wilson sez:
> > It should not be hard. There are two things you need to beware of,
> > though. First, your modem must be set to auto answer! Some modems
> > default to auto answer on, most don't. Some (not many) you can set with
> > a jumper or a dip switch. If your modem is not set to auto answer, you
> > must set it (usually with an AT command). It is also best to set your
>
> Until your first power failure, when it will revert to the defaults...
>
> i.e. -- it's best to get a modem with such a dip switch.....
>
> --
> A host is a host from coast to coast.................wb8foz@nrk.com
> & no one will talk to a host that's close........[v].(301) 56-LINUX
> Unless the host (that isn't close).........................pob 1433
> is busy, hung or dead....................................20915-1433
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: