Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) caller id on PRI




Matt,

I'm curious about what type of switch is your PRI hooked
to? is it a 5ESS or DMS ? or something else ? 

George


On Thu, 26 Mar 1998, Matt Holdrege wrote:

> The Max or any PBX can insert the calling number in the setup message, but
> the ingress switch usually overrides that depending on the configuration.
> 
> 
> At 11:00 AM 3/26/98 -0800, Steve LaDuke wrote:
> >Matt,
> >
> >I have a PB PRI ISDN into my max2012 (5.0Ap33).  The PB installer said
> >that there was no difference between a phone switch and a Max.
> >
> >I did a little test.  When I make a voice call from the PRI to a Cell
> >phone,
> >I do get the calling number.
> >
> >If I put anything into {teco->Bill #} in the profile, then I do not get
> >the calling
> >phone number.
> >
> >I have three phone numbers and wanted to be able to specify which one to
> >dial from.   (No reason, just playing.)
> >
> >So the Max does have some control over sending of the calling phone
> >number.
> >
> >Steve LaDuke.
> >
> >> -----Original Message-----
> >> From:	Matt Holdrege [SMTP:matt@ascend.com]
> >> Sent:	Wednesday, March 25, 1998 3:14 PM
> >> To:	George E. Navas
> >> Cc:	ascend-users@max.bungi.com
> >> Subject:	Re: (ASCEND) caller id on PRI
> >> 
> >> At 03:07 PM 3/25/98 -0800, George E. Navas wrote:
> >> >
> >> >I was wondering if anybody knows if there is an option that I need to
> >> 
> >> >turn on the Max4004 that enables caller id on the pri. It appears
> >> that
> >> >when our PRI makes a call to somebody else they do not see our
> >> number.
> >> >Pacbell has informed that they have it enabled, and that perhaps
> >> >I don't have the Max option enable. However, I looked in the manual
> >> and
> >> >can't seem to find anything that turns this feature on. 
> >> 
> >> This is totally up to telco. It has nothing to do with the Max. The
> >> serving
> >> switch generates this CLID. It receives the CLID info from the sending
> >> switch. Perhaps PB thinks the Max is a PBX?
> >> 
> >
> Matt Holdrege		http://www.ascend.com	matt@ascend.com
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

==============================================================================

		B A Y   A R E A   I N T E R N E T   S O L U T I O N S

George E. Navas   		navas@bayarea.net
Voice: (408)260-5000  		Fax:(408)260-5003 	http://www.bayarea.net
==============================================================================

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


Follow-Ups: References: