Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) caller id on PRI
I don't personally have one anymore, but it used to be connected to a 5ESS.
But for this discussion, it shouldn't matter.
At 11:04 AM 3/27/98 -0800, George E. Navas wrote:
>
>Matt,
>
>I'm curious about what type of switch is your PRI hooked
>to? is it a 5ESS or DMS ? or something else ?
>
>George
>
>
>On Thu, 26 Mar 1998, Matt Holdrege wrote:
>
>> The Max or any PBX can insert the calling number in the setup message, but
>> the ingress switch usually overrides that depending on the configuration.
>>
>>
>> At 11:00 AM 3/26/98 -0800, Steve LaDuke wrote:
>> >Matt,
>> >
>> >I have a PB PRI ISDN into my max2012 (5.0Ap33). The PB installer said
>> >that there was no difference between a phone switch and a Max.
>> >
>> >I did a little test. When I make a voice call from the PRI to a Cell
>> >phone,
>> >I do get the calling number.
>> >
>> >If I put anything into {teco->Bill #} in the profile, then I do not get
>> >the calling
>> >phone number.
>> >
>> >I have three phone numbers and wanted to be able to specify which one to
>> >dial from. (No reason, just playing.)
>> >
>> >So the Max does have some control over sending of the calling phone
>> >number.
>> >
>> >Steve LaDuke.
>> >
>> >> -----Original Message-----
>> >> From: Matt Holdrege [SMTP:matt@ascend.com]
>> >> Sent: Wednesday, March 25, 1998 3:14 PM
>> >> To: George E. Navas
>> >> Cc: ascend-users@max.bungi.com
>> >> Subject: Re: (ASCEND) caller id on PRI
>> >>
>> >> At 03:07 PM 3/25/98 -0800, George E. Navas wrote:
>> >> >
>> >> >I was wondering if anybody knows if there is an option that I need to
>> >>
>> >> >turn on the Max4004 that enables caller id on the pri. It appears
>> >> that
>> >> >when our PRI makes a call to somebody else they do not see our
>> >> number.
>> >> >Pacbell has informed that they have it enabled, and that perhaps
>> >> >I don't have the Max option enable. However, I looked in the manual
>> >> and
>> >> >can't seem to find anything that turns this feature on.
>> >>
>> >> This is totally up to telco. It has nothing to do with the Max. The
>> >> serving
>> >> switch generates this CLID. It receives the CLID info from the sending
>> >> switch. Perhaps PB thinks the Max is a PBX?
>> >>
>> >
>> Matt Holdrege http://www.ascend.com matt@ascend.com
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>>
>
>===========================================================================
===
>
> B A Y A R E A I N T E R N E T S O L U T I O N S
>
>George E. Navas navas@bayarea.net
>Voice: (408)260-5000 Fax:(408)260-5003 http://www.bayarea.net
>===========================================================================
===
>
>
Matt Holdrege http://www.ascend.com matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: