Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) caller id on PRI
The Max or any PBX can insert the calling number in the setup message, but
the ingress switch usually overrides that depending on the configuration.
At 11:00 AM 3/26/98 -0800, Steve LaDuke wrote:
>Matt,
>
>I have a PB PRI ISDN into my max2012 (5.0Ap33). The PB installer said
>that there was no difference between a phone switch and a Max.
>
>I did a little test. When I make a voice call from the PRI to a Cell
>phone,
>I do get the calling number.
>
>If I put anything into {teco->Bill #} in the profile, then I do not get
>the calling
>phone number.
>
>I have three phone numbers and wanted to be able to specify which one to
>dial from. (No reason, just playing.)
>
>So the Max does have some control over sending of the calling phone
>number.
>
>Steve LaDuke.
>
>> -----Original Message-----
>> From: Matt Holdrege [SMTP:matt@ascend.com]
>> Sent: Wednesday, March 25, 1998 3:14 PM
>> To: George E. Navas
>> Cc: ascend-users@max.bungi.com
>> Subject: Re: (ASCEND) caller id on PRI
>>
>> At 03:07 PM 3/25/98 -0800, George E. Navas wrote:
>> >
>> >I was wondering if anybody knows if there is an option that I need to
>>
>> >turn on the Max4004 that enables caller id on the pri. It appears
>> that
>> >when our PRI makes a call to somebody else they do not see our
>> number.
>> >Pacbell has informed that they have it enabled, and that perhaps
>> >I don't have the Max option enable. However, I looked in the manual
>> and
>> >can't seem to find anything that turns this feature on.
>>
>> This is totally up to telco. It has nothing to do with the Max. The
>> serving
>> switch generates this CLID. It receives the CLID info from the sending
>> switch. Perhaps PB thinks the Max is a PBX?
>>
>
Matt Holdrege http://www.ascend.com matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: