Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) caller id on PRI
Matt,
I have a PB PRI ISDN into my max2012 (5.0Ap33). The PB installer said
that there was no difference between a phone switch and a Max.
I did a little test. When I make a voice call from the PRI to a Cell
phone,
I do get the calling number.
If I put anything into {teco->Bill #} in the profile, then I do not get
the calling
phone number.
I have three phone numbers and wanted to be able to specify which one to
dial from. (No reason, just playing.)
So the Max does have some control over sending of the calling phone
number.
Steve LaDuke.
> -----Original Message-----
> From: Matt Holdrege [SMTP:matt@ascend.com]
> Sent: Wednesday, March 25, 1998 3:14 PM
> To: George E. Navas
> Cc: ascend-users@max.bungi.com
> Subject: Re: (ASCEND) caller id on PRI
>
> At 03:07 PM 3/25/98 -0800, George E. Navas wrote:
> >
> >I was wondering if anybody knows if there is an option that I need to
>
> >turn on the Max4004 that enables caller id on the pri. It appears
> that
> >when our PRI makes a call to somebody else they do not see our
> number.
> >Pacbell has informed that they have it enabled, and that perhaps
> >I don't have the Max option enable. However, I looked in the manual
> and
> >can't seem to find anything that turns this feature on.
>
> This is totally up to telco. It has nothing to do with the Max. The
> serving
> switch generates this CLID. It receives the CLID info from the sending
> switch. Perhaps PB thinks the Max is a PBX?
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: