Re: (ASCEND) Disconnect Cause 101 but radif shows Ack - MAJOR problem

["Jerry O'Brien" <jobrien@cuttingedge.net>]

101 means that user is already on. Is that the case?

Jerry O'Brien
Network Administrator,
CuttingEdge.net

----- Original Message -----
From: <ascend@digistar.com>
To: <ascend-users@bungi.com>
Sent: Friday, October 29, 1999 11:34 PM
Subject: (ASCEND) Disconnect Cause 101 but radif shows Ack - MAJOR problem


>
> I am plagued by a problem that is causing serious grief.
>
>
> At times of high activity users are being disconnected after the radius
> server authenticates the user.  The radif radius debug shows the user
> entered the correct password and "Authentication Ack" but the radius
> detail file shows Disconnect Cause 101.
>
> At slower call volumes the disconnect problem disappears.
>
> Below is my DEFAULT user:
>
>
> DEFAULT Password = "UNIX"
>         User-Service=Framed-User,
>         Framed-Protocol=PPP,
>         Ascend-Maximum-Channels=1
>
> I am using FreeBSD 3.1 and have tried numerous radius servers, old and new
> ascendd, the livingston radius and cistrond - all show successful
> authentication in the radius log and in -x debug mode but the 4048 boots
> the user off and displays "LAN security error".  I have Auth Pool = Yes.
> I have no connectivity issues or authentication timeout problems that I
> can see.  Ping times to the radius server are under 10ms.
>
>
> The max 4048s are all running 6.1.7, newer versions seemed to be worse.
>
>
> What is even more odd is three other 4048s (same software, etc) do not
> experience this problem at all, ever.  The problem is related to three
> individual units.
>
>
> I have tried everything I can think of to remedy the problem (nvram clear,
> etc.) but nothing seems to make a difference.
>
>
> Anyone got any ideas?
>
>
>
> Thanks!
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>