(ASCEND) RIPv2 on a Max200

["Sascha E. Pollok" <sp@iphh.de>]

Dear folks,

a customer of us has a Max200 running TAOS 5.0plxx dunno exactly.
It announces routes via RIPv2 to a Cisco, this works fine.
The Max doesn't use Radius/Tacacs but has some Connection Profiles
with static IPs configured. All Profiles are Ans-Only!

The problem is, that the Max announces all his Profile-Routes
via RIP even when the customer is not connected. This is a problem
for them because they have a second Max 800 that has the
same Profiles configured and listens to the same Dialin-Numbers.
(combined BRI cards for dial-in with several NT provided
by the Telco).

Strange setup,... I think this should work except for the
problem with the Routes that get announced from the Max 200 when
customers are not dialed in.

Tips? Hints? Solutions?

Thank y'all!

Regards,
 Sascha

 ---
 Sascha E. Pollok
 Network Operations / Internet Port Hamburg
 Grosse Reichenstrasse 27
 D-20457 Hamburg
 Germany
 Tel.  +49 40 37 49 19-0
 Fax   +49 40 37 49 19-29
 Email sp@iphh.net

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>