RE: (ASCEND) strange RADIUS Problem

["Tani, Tomoki" <Tomoki.Tani@gs.com>]

Robert,

 I think Max use this Answer profile only for the connection which is not
much with Radius or Connection Profile entry.
If I am not right, please someone correct me.

Yes, this list helped me a lot. When local Ascend or Vender could not solve,
I found the solution here always!

Regards,
tomoki

> -----Original Message-----
> From:	robert.koruna@tiwag.co.at [SMTP:robert.koruna@tiwag.co.at]
> Sent:	Friday, October 22, 1999 12:37 AM
> To:	Tani, Tomoki
> Cc:	ascend-users@bungi.com
> Subject:	RE: (ASCEND) strange RADIUS Problem
> 
> Hi Tani,
> 
> GREAT ;-)))
> 
> You really made my life easier. You were right.
> But I'm pretty sure that I had this also enabled before reconfiguring 
> the max. 
> 
> Does the max now authenticate PPP sessions via CHAP or any 
> other protocol. Are all the settings in the Ethernet->Answer - profile 
> ignored ? Do you know somthing about it ?
> 
> Thanks a lot again, I talked to ascend for about 1 month and didn't 
> get a solution.
> 
> Robert
> 
> > Hi Robert,
> > 
> > I had same problem before and at that time, I found that,  by mistake, I
> > set Ethernet/Answer/Use Answer as Default=Yes. When turned it to "No",
> it
> > immedeately started dial-out.  Hope this helps...
> > 
> > tomoki
> > 
> > > -----Original Message-----
> > > From:	robert.koruna@tiwag.co.at [SMTP:robert.koruna@tiwag.co.at]
> > > Sent:	Thursday, October 21, 1999 5:55 PM
> > > To:	ascend-users@bungi.com
> > > Subject:	(ASCEND) strange RADIUS Problem
> > > 
> > > Hello,
> > > 
> > > I'm working on a real strange RADIUS-Problem at the moment.
> > > I needed to configure my max2012 once more, so I did a fclear and 
> > > a nvramclear, and typed all my configuration options in the max 
> > > once more. 
> > > Im authenticating and accounting on a RADIUS-server. I use dialin-
> > > /dialout-profiles and static routes catched from RADIUS. So after 
> > > configuring the max dialin works, I have all the routes, but my 
> > > dialout-profiles don't work anymore! If I configure the
> dialout-profile
> > > static in the max, the radius-routes guide me to that profile and the
> > > dialout works. The problem is, that I don't want to configure all my
> > > dialout profiles static in the max. Tried this with software feik.m20
> > > version 6.1.24, 7.0.22, 7.2.3. Didn't help anything. Debugged the
> > > RADIUS-Server with the -x option. The server tells me that all
> > > information is replied to the max. Can't verify this on the max, no
> > > radif command available on max2000.
> > > 
> > > hopefully someone has an idea ;-)
> > > 
> > > thanks in advance,
> > > 
> > > Robert
> > > 
> > > 
> > > Robert Koruna <robert.koruna@tiwag.co.at>
> > > 
> > > -----------------------------------------
> > > TIWAG-Tiroler Wasserkraftwerke AG
> > > Abteilung IT-UE
> > > Eduard Wallnoefer-Platz-2
> > > A 6010-Innsbruck
> > > 
> > > Tel.: +43 / (0)512 / 506 - 2772
> > > Fax:  +43 / (0)512 / 506 - 2670
> > > www:  http://www.tiwag.at
> > > -----------------------------------------
> > > ++ Ascend Users Mailing List ++
> > > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > 
> 
> 
> 
> 
> Robert Koruna <robert.koruna@tiwag.co.at>
> 
> -----------------------------------------
> TIWAG-Tiroler Wasserkraftwerke AG
> Abteilung IT-UE
> Eduard Wallnoefer-Platz-2
> A 6010-Innsbruck
> 
> Tel.: +43 / (0)512 / 506 - 2772
> Fax:  +43 / (0)512 / 506 - 2670
> www:  http://www.tiwag.at
> -----------------------------------------
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>