Re: (ASCEND) Busy out modems

["Hartmut Schroeder" <hacko@mms.de>]

From:           	"Hugo A. Uriona" <administrator@zuper.net>
To:             	"Ascend List" <ascend-users@bungi.com>
Subject:        	(ASCEND) Busy out modems
Date sent:      	Thu, 21 Oct 1999 18:51:38 -0400

> Is there a way to busy out analog modems on a Max TNT? 

I haven't tested it but I suggest to change the Callrouting entrys for
the Modemboards AND the default entry.
If you look at your TNT:
admin> show
Shelf 1 ( standalone ):
    { shelf-1 slot-1 0 }       UP       8e1-card
    { shelf-1 slot-2 0 }       UP       hdlc2-card
    { shelf-1 slot-3 0 }       UP       csm3v-card
    { shelf-1 slot-16 0 }      UP       4ether2-card
admin> dir call-route
     9  09/08/1999 14:50:35  { { { any-shelf any-slot 0 } 0 } 0 } # your default entry
# now there are one/two entrys for the slot 3

# change the default
admin> read call-route { { { any-shelf any-slot 0 } 0 } 0 }
admin> list
[in CALL-ROUTE/{ { { any-shelf any-slot 0 } 0 } 0 }]
index* = { { { any-shelf any-slot 0 } 0 } 0 }
trunk-group = 0
phone-number = ""
preferred-source = { { any-shelf any-slot 0 } 0 }
call-route-type = any-call-type
admin> set phone-number = 12345		# so now default gets active only if the user dialed this Number
admin> write

# now look for the entrys of the modemscards and change them as needed
# depending on the modemcard the system (or you) may have created more than one
# entry when you first poweron the system. Read them and change them as needed. 

# look with 
admin> callroute -ah
# how your changes apply the distribution of incomeing Calls.

Anybody a better Idea?

Regards H.Schroeder


Hartmut Schroeder             MMS Communication AG
mailto:hacko@mms.de           Eiffestrasse 598
http://www.mms.de/~hacko      20537 Hamburg, Germany
Phone: +49 40 211105-40       Fax: +49 40 210 32 210
UTM 32U0569835 5934083 WGS84
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>