Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Re: Mixing MAXEN/PM3's

     I assume, though, that Ascend's RADIUS does actually support the 
     Framed-Filter attribute, but their hardware does not.  For example, I 
     could continue using Ascend-Data-Filter and Ascend-Call-Filter with my 
     Ascend hardware, but could use this same RADIUS server with 
     Framed-Filter for other RAS servers that support it, correct?


______________________________ Reply Separator _________________________________
Subject: Re: (ASCEND) Re: Mixing MAXEN/PM3's
Author:  jmartine (jmartine@ecis.com) at hdqt-unix-mime
Date:    1/23/98 5:07 PM


If you are using Radius filter then you will be out of luck. The Maxes 
don't support the Filter-Id attribute 11. I've asked many times for this 
to be fixed to no avail. 
     
On Fri, 23 Jan 1998, Sherwood Pekelo wrote:
     
> On Fri, 23 Jan 1998, Del Hines wrote: 
> 
> > Sorry for the cross-post.  I'm needing answers pretty quickly. 
> > 
> > I have the opportunity to buy a couple of used PM3's at a good price (if I 
> > hurry). I currently have MAX4048's and I'm using the ascend version of
> > RADIUS.  What will I have to do with RADIUS to use both brands on the same 
> > network? 
> > 
> > Will I need to set up and run a separate instance of RADIUS along with the 
> > Ascend version? If so, can I run two versions on the same server while
> > using different auth ports?  Will I have to set up two different servers? 
> > Is there one RADIUS version that will handle both products? 
> 
> AFAIK, just make sure that you have the dictionary items for the PM3, and 
> since you'll be running PM3s you may want to switch to RADIUS 2.0.1,
> then make sure you have the dictionary items for the Ascend...You aren't 
> running a hacked version right?  We have folks on the portmaster-users
> list that could tell you...
> 
> Note: PM3s will absolutely refuse to access a Radius server at other than 
> port 1646 or was it 1645 hehe...
> 
> 
> --
> Aloha from Paradise,
> 
> Sherwood
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:       send unsubscribe to ascend-users-request@bungi.com 
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
> 
     
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com 
To get FAQ'd:   <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: