Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Re: Mixing MAXEN/PM3's
If you are using Radius filter then you will be out of luck. The Maxes
don't support the Filter-Id attribute 11. I've asked many times for this
to be fixed to no avail.
On Fri, 23 Jan 1998, Sherwood Pekelo wrote:
> On Fri, 23 Jan 1998, Del Hines wrote:
>
> > Sorry for the cross-post. I'm needing answers pretty quickly.
> >
> > I have the opportunity to buy a couple of used PM3's at a good price (if I
> > hurry). I currently have MAX4048's and I'm using the ascend version of
> > RADIUS. What will I have to do with RADIUS to use both brands on the same
> > network?
> >
> > Will I need to set up and run a separate instance of RADIUS along with the
> > Ascend version? If so, can I run two versions on the same server while
> > using different auth ports? Will I have to set up two different servers?
> > Is there one RADIUS version that will handle both products?
>
> AFAIK, just make sure that you have the dictionary items for the PM3, and
> since you'll be running PM3s you may want to switch to RADIUS 2.0.1,
> then make sure you have the dictionary items for the Ascend...You aren't
> running a hacked version right? We have folks on the portmaster-users
> list that could tell you...
>
> Note: PM3s will absolutely refuse to access a Radius server at other than
> port 1646 or was it 1645 hehe...
>
>
> --
> Aloha from Paradise,
>
> Sherwood
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: