Re: (ASCEND) Ascend and Cisco Frame Relay

To: Phillip Vandry <vandry@Mlink.NET>, bbsadmin@sheltonbbs.com
Subject: Re: (ASCEND) Ascend and Cisco Frame Relay
From: "Kevin A. Smith" <kevin@ascend.com>
Date: Thu, 22 Jan 1998 13:00:46 -0800
Cc: ascend-users@bungi.com
In-Reply-To: <199801221838.NAA17415@Iodine.Mlink.NET>
References: <Your message of "Thu, 22 Jan 1998 10:34:34 EST." <199801221634.KAA08123@mail.sheltonbbs.com>
Sender: owner-ascend-users@max.bungi.com

At 01:38 PM 1/22/98 -0500, Phillip Vandry wrote:
>> I am about the add the Hash codes for the Ascend Max 4048 to allow it 
>> to use the Serial WAN port for my Frame Relay.  This Max will need to 
>> be set up on a Point to Point connection with a Cisco 2501 router.  
>> Has anyone done this with success?  Is there anything I should 
>> consider before doing this?  I currently have a Cisco 2501 on the LAN 
>> with the MAX, but if the Serial WAN port will work, I would prefer 
>> that (eliminates a hub and a Router).  Thanks for any information.
>
>Yes, this works. Keep the number of PVCs under 3 though. We has a few
>problems with more PVCs than that.

Also remember to tell the cisco to use:

encapsulation frame-relay IETF 

by default they don't, and it won't work ;-)

See also:   http://www.ascend.com/690.html


Kevin


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

Re: (ASCEND) Ascend and Cisco Frame Relay

From: Phillip Vandry <vandry@Mlink.NET>

Prev by Date: Re: (ASCEND) Good place to buy a P85/P75
Next by Date: RE: (ASCEND) ISDN setup
Prev by thread: Re: (ASCEND) Ascend and Cisco Frame Relay
Next by thread: Re: (ASCEND) 100Mbit ISDN Solution
Index(es):
- Main
- Thread