RE: (ASCEND) ISDN setup

[Jason Nealis <nealis@babylon.erols.com>]

 If I'm reading this correct, you want the box to answer with a digital
tone when the call is tagged as voice. To enable this set the following

Ethernet-->Mod Config--->Wan Options--->Ans 1#=XXXX

   (XXXX= The DNIS number of the hunt you want answered digitally)


Jason Nealis
Director Internet Operations
Network Access
Erols Internet

 

On Thu, 22 Jan 1998, Steve LaDuke wrote:

> Joe Pautler wrote:
> 
> > ... to map a number specifically for digital data calls, so that users
> > could place the calls as ISDN *voice* calls (tollsaver feature) and
> > the Max would still connect them as digital rather than handing them
> > off to the modem cards.
> 
> How does one configure a number to be answered as an ISDN *voice*
> call, instead of a digital modem call?
> 
> I have 3 phone numbers on my PRI (no trunk groups.)
> The hardware is a Max 2012.
> 
> Thanks,
> Steve LaDuke
> Tuttle & Co.
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

References:

• RE: (ASCEND) ISDN setup
• From: Steve LaDuke <steve_laduke@tuttle.com>

---

• Prev by Date: Re: (ASCEND) Ascend and Cisco Frame Relay
• Next by Date: Re: (ASCEND) AP24 Bug [ small ]
• Prev by thread: RE: (ASCEND) ISDN setup
• Next by thread: (ASCEND) P75s and 5.1
• Index(es):
  • Main
  • Thread