Re: (ASCEND) 100Mbit ISDN Solution

["Leon McCalla" <ascend@caribbeanlink.com>]

i've come accross this one before. if the customer doesn't have a 10/100
switch, i'd buy a cheap 2 port 10/100 switch and a dirt cheap 5 port 10BaseT
hub.


Leon McCalla
leon@caribbeanlink.com
-----Original Message-----
>At 12:20 PM 1/18/98 -0600, Luke Parrish wrote:
>>Hey guys. Ran into a problem the other day. A customer of mine has a
>>100Mbit network, with 100Mbit hubs. They want ISDN access, so they hook a
>>Pipeline 50 to their hub, dial it up, connect to the internet. But, hey
>>nothing on the network can see it. Doh! I didnt think about the little
>>10Mbit into 100Mbit hub problem. I called Ascend and they said they do not
>>have a router than can do 100Mbit yet, does anyone here know of an ISDN
>>router that will support 100Mbit, or some kind of AUI transceiver that may
>>go 10 to 100? Any help would be greatly appreciated...
>
>10/100 transceivers are pretty cheap from a variety of vendors. However,
>most 100BT hubs are capable of doing 10BT as well. Sometimes it's
>auto-sensing, sometimes you have to telnet into the hub and manually change
>the port to 10BT.
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) weary about upgrading via tftp
• Next by Date: Re: (ASCEND) radiusdbm file and reading and writing
• Prev by thread: Re: (ASCEND) Ascend and Cisco Frame Relay
• Next by thread: Re: (ASCEND) 100Mbit ISDN Solution
• Index(es):
  • Main
  • Thread