Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) 4048 And ISDN Calls
I am calling in with a 3Com Impact IQ.
Getting "The computer you are dialing into is not answering. Try again
later" from Win'95 DUN. Works OK on analog calls with DUN and
Hyperterm.
No messages at all in the MAX status window (00-200). Seems like its not
getting the call.
Exact same setup works OK on our 4002 for both ISDN and analog.
On Mon, 19 Jan 1998, Kevin A. Smith wrote:
> At 04:59 PM 1/17/98 -0500, Dave Fisher wrote:
> >I have just installed 2 4048's and analog dial-in's up to 56K work well.
> >
> >The problem is that ISDN (digital) calls don't. I get a message that the
> >host is not responding.
>
> And on the MAX side, what error messages do you see?
> Do you see the calls even get to the MAX - maybe the trunk is configured
> as voice-only?
> Is this a CT1 or PRI trunk?
>
> >My question is, does the 4048 come standard with the hybrid software to
> >allow both analog and digital users, or did Bell-Atantlic forgit an option
> >when it installed the T1/PRI's?
>
> The 4048 includes both analog and hybrid access:
> (2) T1/PRI WAN Access Switch with (48) Series56 Digital Modems.
> Includes Hybrid Access 4000 (ISDN PRI Signaling, Frame Relay support, and
> digital access for up to (48) channels). AC power cable and documentation
> included. With North America ISDN PRI signaling
>
>
>
> Kevin
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: