Re: (ASCEND) dialout and callback

[Olivier PRENANT <ohp@pyrenet.fr>]

On Sun, 28 Feb 1999, Stephen Mulrine wrote:

> If 0561508595 is the phone number of the other end, you'll need to
> prefix it with the trunk group number of the channel you want to dial out
> on.  I think all the channels are in trunk group 9 by default, so using
> "90561508595" as the Ascend-Dial-Number would cause the MAX to dial out on
> the first available channel.  The above would have failed because the
> MAX would treat the number as "561508595" on Trunk Group 0, but the only
> valid trunk group numbers are 4-9.  You should also check that the
> following options are set:
>   System -> Sys Config -> Use Trunk Grps=Yes
>   Ethernet -> Mod Config -> WAN Options -> Dial Plan=Trnk Grp
> 
> Stephen
> 
Thanks for your quick answer.
I did what you said (Use Trunk group was set to No) and added a 9 to the
phone number.

Still the same, the max doesn't dial.

Any clue??

TIA,
--
Olivier PRENANT         	Tel:	+33-5-61-50-97-00 (Work)
Quartier d'Harraud Turrou           +33-5-61-50-97-01 (Fax)
31190 AUTERIVE                      +33-6-07-63-80-64 (GSM)
FRANCE                      Email: ohp@pyrenet.fr
------------------------------------------------------------------------------
Make your life a dream, make your dream a reality. (St Exupery)

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>