Re: (ASCEND) Maxx6000 wont release IP

["Ilker TEMIR (NAD)" <ilker@marketweb.net.tr>]

	I had a similar problem some time ago. Why don't you check arp
table of your max and your backbone router. Clear any arp entry mapping
your client's IP.
	
	Ilker TEMIR - MarketWeb

> Our max 6048 has decided to hold one of my local lan ip addresses hostage.
> 
> When the client computer ( on the lan ) boots up, it errors with a hardware
> address conflict. The hardware addresss that is conflicting is the max
> itself.
> 
> Max has never had this ip address in it, but it is in the same class c as
> its own ip. Other clients on the same network in the same ip block have no
> problems. Max has decided to hold this one hostage.
> If I boot the client machine without ehternet connected, it will boot fine,
> and then re-connecting the ethernet cable is fine as well, everything works.
> 
> How can I get max to release this ip so the client computer can boot
> normally? The ip address does not show up in show ip routes at all.
> 
> Proxy mode is set to active for dialup customers to use same ip block as
> well.
> 
> Shane Newberg
> Action Internet
> 1919 Sand Lake Rd
> Orlando, FL 32809
> 407-850-0201
> administrator@actioninternet.net
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>