Fw: (ASCEND) Maxx6000 wont release IP

["Shane Newberg" <shane@actioninternet.net>]

client ip xxx.xxx.55.248
Subnetmask 255.255.255.0

Maxx Ip xxx.xxx.55.254/24

-----Original Message-----
From: Joseph Bridgewater <Joseph@DontSpamAustinTX.net.bungi.com>
To: ascend-users@bungi.com <ascend-users@bungi.com>
Date: Wednesday, April 21, 1999 1:14 AM
Subject: Re: (ASCEND) Maxx6000 wont release IP


>I've seen that happen when the subnet in a max's IP didn't match the subnet
>in a hosts's IP which was on the same LAN, or something like that (it's
>been a while).  Does your clients netmask match the max's?
>
>
>At 09:26 PM 4/20/99 , Shane Newberg wrote:
>>Our max 6048 has decided to hold one of my local lan ip addresses hostage.
>>
>>When the client computer ( on the lan ) boots up, it errors with a
hardware
>>address conflict. The hardware addresss that is conflicting is the max
>>itself.
>>
>>Max has never had this ip address in it, but it is in the same class c as
>>its own ip. Other clients on the same network in the same ip block have no
>>problems. Max has decided to hold this one hostage.
>>If I boot the client machine without ehternet connected, it will boot
fine,
>>and then re-connecting the ethernet cable is fine as well, everything
works.
>>
>>How can I get max to release this ip so the client computer can boot
>>normally? The ip address does not show up in show ip routes at all.
>>
>>Proxy mode is set to active for dialup customers to use same ip block as
>>well.
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>