Re: (ASCEND) Max not routing (fwd)

["asnet" <ascendlist@asnet.co.nz>]

What does your route table look like when you have a user dialed in?
-----Original Message-----
From: Jake Messinger <jake@ams.com>
To: MegaZone <megazone@megazone.org>
Cc: Ascend Users <ascend-users@bungi.com>
Date: Tuesday, 20 April 1999 06:28
Subject: Re: (ASCEND) Max not routing (fwd)


>On Mon, 19 Apr 1999, MegaZone wrote:
>
>:Once upon a time Jake Messinger shaped the electrons to say...
>:>subnet as a couple of Lucent PM 3's. So anyway, I have the users set up
in
>:>radius to get a framed address of 255.255.255.255 so it assigns an
address
>:
>:I think you typo'd that, since I know you know better. :-)
>:255.255.255.254 is the value to assign an IP, 255.255.255.255 lets the
user
>:pick their own IP.
>
>Yah yah.. I typoed. Its 254.
>:
>:>win 98 box dialing in and it claims that the netmask is 255.255.255.0.
Why
>:>is it doing this?? There should be no netmask.
>:
>:That's windows.  Remember, PPP does not say anything about netmasks, and
>:windows will just stick on a netmask.
>
>Hrm, well should I care? Is that my problem then?
>
>:>things? Can I not assign remote ips on the max that are considered local
to
>:>its ethernet? Do I have to put the max in a different subnet than the ip
>:>addresses I assign to the dial in users?
>:
>:You should be able to assign IPs that reside within the same subnet as the
>:ethernet interface.
>
>Well right, like the PM 3's work. But it doesnt seem to work on the Max.
>SHouldnt it inject a /32 route into the max's route table as soon as the
>remote connection is made, just like on a PM 3? Its not doing this.
>
>~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
>Jake Messinger, VP. ph:713-772-6690 Lucent Dealer
>AMS, Inc. fx:713-774-3498 Medical Billing
>8300 Bissonnet  #400 jake@ams.com , ICQ# 4403734 Internet Services
>Houston, Texas  77074 www.ams.com/~jake and Hardware
>
>Adjunct Professor University of Houston, CBA jake@uh.edu
>~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~
>
> INVENTOR OF the _.,-*~''~*-,._ SQUIGGLES (c) 1978
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>