Re: (ASCEND) P75 - cause code 34

[Matt Holdrege <matt@ascend.com>]

If you call the GTE ISDN help desk and tell them your exchange and ask them
to contact the NOC to see if there are any circuit alarms at your exchange,
you may get to the root of the problem. 

Didn't you know you had to troubleshoot the carriers network for them?


At 04:52 PM 4/9/99 -0700, James Johnson wrote:
>
>Thanks for all the help. I've contacted GTE, but its very difficult with
>this sporadic problem. Once 34 comes up, I never get to dial out or get
>incomming calls. If one channel is already dialed out its fine, it won't
>drop until its terminated at my end. But after that, I'm hosed until I
>reset the pipeline.
>
>FYI 7.3.0 is sweet. Finally dba works!
>
>At 10:06 AM 4/9/99 -0700, Matt Holdrege wrote:
>>At 12:16 AM 4/9/99 -0700, James Johnson wrote:
>>>
>>>Just recently my pipeline 75 stopped working, siting cause code 34. Upon
>>>resetting the unit it works fine, but sometime later (10-20 min) it again
>>>stops with cause 34. 
>>>
>>>According to the Ascend doc, 34 refers to 'No circuit/channel available'.
>>>I'm not certain what this means. 
>>>
>>>This unit is ~1.5 years old, it is a 'new' revision, and the AOS version
>>>I'm running is 6.1.19. I've been running with this for about 2-3 months
>>>now. I'm Looking forward to trying 7.3.0 with DBA (finally!).
>>>
>>>Does anyone have a clue what might cause this type of behavior?
>>
>>I've seen this before and it was the telco. The switch ran out of 64K
>>trunks. Sometimes I got through, sometimes I didn't. I tried switching to
>>56K and it worked everytime. I called the telco and explained the problem
>>and they found that a large bank of circuits had failed.
>>
>
>---
>;----------------------------------------------- 
>    cwd                ; "Do or do not. There is 
>    xor     ax,dx      ; no try." Yoda 
>    sub     ax,dx      ; 
>    mov     Power,ax   ; plexus@seanet.com 
>;-----------------------------------------------
>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>