Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX ISDN Dial-Out
No - there is never problems initiating manual calls.
Henrik
On Tue, 24 Mar 1998, Jason Nealis wrote:
>
> When you initiate the call manually does it every have any problems?
>
> Jason
>
>
> On Tue, 24 Mar 1998, Henrik Vestergaard wrote:
>
> > I have a problem geting a MAX 4000 to communicate with a Cisco 2503i.
> > The problem is - for some reason - sometimes - the MAX does not want
> > to make an ISDN call to the Cisco even if the Cisco is pinged locally
> > from the MAX. I cannot se it even tries to make the call. At other times
> > it dials as expected and the connection is establised.
> > Furthermore it happens that the connection is broken even if data flows on
> > the link. The routing in the MAX is OK, and there are no other profiles
> > using the same addresses and so.
> >
> > My setup:
> >
> > Local end: MAX 4000 running 5.0Ap33 (5.0Ap13 tried alos withut any
> > difference)
> > Remote end: Cisco 2503i running 11.2(9)
> >
> > A local connection profile is activated on the MAX. It uses MPP and
> > STAC 9, which both seens to work.
> >
> > The dialer timeout on the MAX is quite low - 15 secs.
> >
> > If somebody has some experience with this sort of problem please help me.
> >
> > Thanks.
> >
> > Best regards
> >
> > Henrik Vestergaard
> > Network Manager
> > Tele Denmark
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: