Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) MAX ISDN Dial-Out
When you initiate the call manually does it every have any problems?
Jason
On Tue, 24 Mar 1998, Henrik Vestergaard wrote:
> I have a problem geting a MAX 4000 to communicate with a Cisco 2503i.
> The problem is - for some reason - sometimes - the MAX does not want
> to make an ISDN call to the Cisco even if the Cisco is pinged locally
> from the MAX. I cannot se it even tries to make the call. At other times
> it dials as expected and the connection is establised.
> Furthermore it happens that the connection is broken even if data flows on
> the link. The routing in the MAX is OK, and there are no other profiles
> using the same addresses and so.
>
> My setup:
>
> Local end: MAX 4000 running 5.0Ap33 (5.0Ap13 tried alos withut any
> difference)
> Remote end: Cisco 2503i running 11.2(9)
>
> A local connection profile is activated on the MAX. It uses MPP and
> STAC 9, which both seens to work.
>
> The dialer timeout on the MAX is quite low - 15 secs.
>
> If somebody has some experience with this sort of problem please help me.
>
> Thanks.
>
> Best regards
>
> Henrik Vestergaard
> Network Manager
> Tele Denmark
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: