re: (ASCEND) [Q] Slow dialup authentication on MAX 4048

[Brian Smith <bsmith@cerf.net>]

Do you have Default answer profile turned on? Check under Ethernet/Answer.
If so, check the Link Comp= parameter under Ethernet/Answer/PPP
options. Both win95 and NT DUN will take 20-40 seconds extra instead of a
normative 5 or so to authenticate if there is no link comp specified. Try
setting to Link Comp=Stac. Just a thought.

Brian Smith
bsmith@cerf.net

>I am chasing down what I hope to be a minor configuration error on
>my part.  
>When dialing into my MAX(en) 4048 to establish a PPP connection (from 
>Win95
>DUN), the authentication process seems unusually slow (20 - 30
>seconds to
>authenticate). In addition, I notice that modem transfers a large
>amount of
>data - typically receiving upwards of 30 - 35 k from the MAX before
>establishing a PPP link.





++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) rev 6 for Pipe 25?
• Next by Date: (ASCEND) 5.0ap42 Disconnect problem?
• Prev by thread: (ASCEND) 5.0ap42 Disconnect problem?
• Next by thread: Re: (ASCEND) [Q] Slow dialup authentication on MAX 4048
• Index(es):
  • Main
  • Thread