Re: (ASCEND) How to reserve modem ports for MAXDial?

To: Joe Pautler <pautler@grasshopper.cit.buffalo.edu>
Subject: Re: (ASCEND) How to reserve modem ports for MAXDial?
From: John Wells <jwells@pacificcoast.net>
Date: Thu, 05 Mar 1998 16:50:37 -0800
Cc: ascend-users@bungi.com (Ascend Mailing List)
In-Reply-To: <199803032325.SAA27294@grasshopper.cit.buffalo.edu>
Sender: owner-ascend-users@max.bungi.com

At 06:25 PM 3/3/98 -0500, Joe Pautler wrote:
>John Wells wrote:
>]
>]We recently setup a MAX 2024 (currently 5.0Ai28) fed by a PRI having a
>]single hunt group number.  We'd now like to reserve one or two of the MAX
>]modems for outgoing MAXDial calls. 
>
>Well, I have no experience with the 2024, but with the 4048 modems
>can be disabled via selecting the modem card and then selecting
>"Modem Diag", from the console menus.  We disable a number of our modems, 
>to ensure that lines will be available for ISDN callers.  Although, 
>I'm not sure how to set up the channels for outgoing calls only.  With
>our scenario, the lines could still all be in use due to ISDN callers
>using the channels associated with the disabled modems.

Thanks, I'll give this a try. However, I'd expect that disabling the modem
would affect outbound calls as well as inbound ones.

John
jwells@pacificcoast.net

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

(ASCEND) How to reserve modem ports for MAXDial?

From: Joe Pautler <pautler@grasshopper.cit.buffalo.edu>

Prev by Date: (ASCEND) Re: Pipeline 130 slowness, packet loss under load
Next by Date: Re: (ASCEND) Dial-in routing problem (Was: How to reserve modem ports for MAXDial?)
Prev by thread: (ASCEND) How to reserve modem ports for MAXDial?
Next by thread: (ASCEND) EARLY: Some Quirks in fek.m40 6.0.0
Index(es):
- Main
- Thread