Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Cisco & Pipe50

Actually, you can use the Ethernet/Connections/<Profiel Name>/IP Optios.../LAN IP addrs as the 
serial IP address/subnet bits of the Cisco's serial IP addrs, leave the Wan alias as 0.0.0.0 , 
ad the IF adrs as the IP address/subnet bits of the Pipeline. Works well for us.

Best regards,

Lou

------------------------
  From: Marc Williams <marcw@demon.net>
  Subject: Re: (ASCEND) Cisco & Pipe50 
  Date: Thu, 16 Jul 1998 17:24:19 +0000 
  To: Andy Walden <andy@enigma.mtco.com>
  Cc: ascend-users@bungi.com


> Andy Walden wrote:
> 
> > i'm trying to get an ISDN line up between a cisco 2503 and a pipe50 Ubri.
> > I have read the faqs about how I now need to use a bri address as well as
> > my ethernet address and the cisco does the same. the setup looks like
> > this.
> >
> > 206.69.128.50/48---206.69.128.242/30----------206.69.128.241/30-----208.155.32.200
> > Cisco Ethernet      Cisco Bri Int                Pipe 50 IF int     pipe ether
> >
> > problem is getting to the cisco's ethernet interface. i currently can't
> > ping the bri from the pipe50, but seem to be able to from anywhere else.
> > i have tried all kinds of variarations of static routes to get to this
> > thing and not quite sure whats next. thanks
> 
> You would be better of using an unnumbered ISDN link.
> For the Cisco the command is ip unnumbered ethernet0 under the serial interface
> configuration.
> For the Ascend have the WAN Alias the same as the ip for the Cisco's ethernet. Leave
> the IF Adrs blank.
> 
> --
> Marc
> 
> 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---------------End of Original Message-----------------

--------------------------------------------------------
Name: Lou Melograna
E-mail: Lou Melograna <lmelogra@atrioncomm.com>
Atrion Communications Resources
185-I Industrial Parkway
Branchburg, NJ 08876
Ph: 908.231.7777 ext.112
Fx: 908.231.8228 

Date: 07/16/98
Time: 13:55:28
--------------------------------------------------------

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: