Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Cisco & Pipe50
Andy Walden wrote:
> i'm trying to get an ISDN line up between a cisco 2503 and a pipe50 Ubri.
> I have read the faqs about how I now need to use a bri address as well as
> my ethernet address and the cisco does the same. the setup looks like
> this.
>
> 206.69.128.50/48---206.69.128.242/30----------206.69.128.241/30-----208.155.32.200
> Cisco Ethernet Cisco Bri Int Pipe 50 IF int pipe ether
>
> problem is getting to the cisco's ethernet interface. i currently can't
> ping the bri from the pipe50, but seem to be able to from anywhere else.
> i have tried all kinds of variarations of static routes to get to this
> thing and not quite sure whats next. thanks
You would be better of using an unnumbered ISDN link.
For the Cisco the command is ip unnumbered ethernet0 under the serial interface
configuration.
For the Ascend have the WAN Alias the same as the ip for the Cisco's ethernet. Leave
the IF Adrs blank.
--
Marc
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: