Re: (ASCEND) Cisco & Pipe50

To: Marc Williams <marcw@demon.net>
Subject: Re: (ASCEND) Cisco & Pipe50
From: Andy Walden <andy@enigma.mtco.com>
Date: Thu, 16 Jul 1998 13:13:48 -0500 (CDT)
cc: ascend-users@bungi.com
In-Reply-To: <35AE3743.7ECB5F57@demon.net>
Sender: owner-ascend-users@max.bungi.com

> >
> > problem is getting to the cisco's ethernet interface. i currently can't
> > ping the bri from the pipe50, but seem to be able to from anywhere else.
> > i have tried all kinds of variarations of static routes to get to this
> > thing and not quite sure whats next. thanks
> 
> You would be better of using an unnumbered ISDN link.
> For the Cisco the command is ip unnumbered ethernet0 under the serial interface
> configuration.
> For the Ascend have the WAN Alias the same as the ip for the Cisco's ethernet. Leave
> the IF Adrs blank.

We had tried this to start, but the cisco guy didn't make a very good
attempt. We tried it again and he made a better attempt this time and it
worked. The WAN alias should be blank though, like when connecting to any
other ascend product.

-andy

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

Re: (ASCEND) Cisco & Pipe50

From: Marc Williams <marcw@demon.net>

Prev by Date: (ASCEND) 3COM Dual Analog Office Connect
Next by Date: Re: (ASCEND) Making IGP work on a Max
Prev by thread: Re: (ASCEND) Cisco & Pipe50
Next by thread: Re: (ASCEND) Cisco & Pipe50
Index(es):
- Main
- Thread