Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Callback to NT...
At 12:45 PM 8/26/97 -0400, Jim Howard wrote:
>At 20:22 08/25/1997 -0400, Dan Merillat wrote:
>>Heads up... this wasn't a microsloth issue at all!
>>
>>Apparently the bitsurfer does async ISDN,
>>which the max converts to sync before processing PPP (Or after, whatever.
>>Either way, the max has to do an extra conversion) However, there is
>>no flag to specify this conversion on an OUTGOING call, so thats why
>
>so the ascend can only do SYNC PPP on outdials,
Well having received a PPP call, it's not too obvious that you would have
to support V.120 to make the call-back...unless the TA is limited....
>and the BitStuffer can only receive a V.120 call inbound?
Are you sure they didn't fix this yet ?
>Another option (if you must use a TA) is the Zyxel Omni TA128
>it has two serial ports, you can do async->sync ppp in either direction,
>inbound calls, or outbound, handled automaticly by the hardware,
>on either serial port or both as seperate calls,
>or MP bond (in the hardware) both channels over the same serial port.
>(plus it has two POTS jacks like most other TAs)
Also the Pipeline 15 supports async/sync-PPP in both directions.
http://www.ascend.com/1687.html
Kevin
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: