(ASCEND) ascend and radius based connectionprofiles question

[Jan Ronken <jronken@dpp.net>]

Hello,
I have a problem with configuring a Max 4000 with our radiusserver. 

Our site is using a Max 4060. We have a lot of customers who are running 
their own servers on a subnet from us, using ISDN outbound calling 
whenever a request for a specific IP address (the one of the customer) 
comes in. As we are running out of connection profiles, (only 31) we need 
to do this in Radius.
I tried some pseudo-user routes, but it is not working.

What I want to achieve:
Customer A has a pipeline 50, IP adress 195.193.80.28/32 (and NAT). As 
soon as someone tries to connect to 195.193.80.28, the Max 4060 shoul 
dial out and establish the connection. With te connection profiles it 
works, but I need to do this in Radius.
So, all information like route, ip address and callnumber needs to come 
from the radiusserver into the max.

I tried the stuff below and update the Max so it read the config from the 
radius server, but the max does not dial out when trying to connect to 
195.193.80.28/32.

myuser-out Password="ascend", User-Service=Dialout-Framed-User
	User-Name="iyellow",	
	Ascend-Dial-Number="0204210219",
	Framed-Protocol=PPP,
	Framed-Address=195.193.80.28,
	Framed-Netmask=255.255.255.0,
	Ascend-Metric=2,
	Framed-Routing=None,
	Ascend-Idle-Limit=20,
	Ascend-Send-Auth=Send-Auth-PAP,
	Ascend-Send-Secret="secretpwd"

Can you please help me out with a radius example on how to achieve this?

Thank you very much in advance

Jan Ronken
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>