Re: (ASCEND) ascend and radius based connectionprofiles question

[David Kirkpatrick <davidki@sco.COM>]

Jan,

I worked on this for several months and didnt have much success. I have a MAX
4000 with Radius server, but I could never get a static route entered so that
the MAX would dial the PL50 except by using the local connection profiles.

Ascend support were useless and only quoted configs from the user manuals
(which didnt work). In the end, I decided the MAX could only seriously be
used as a dial-in box with Radius, and have gone with the Cisco 3640 instead
as a much better alternative.

Sorry to put a dampener on things,

Regards,

Dave

Jan Ronken wrote:

> Hello,
> I have a problem with configuring a Max 4000 with our radiusserver.
>
> Our site is using a Max 4060. We have a lot of customers who are running
> their own servers on a subnet from us, using ISDN outbound calling
> whenever a request for a specific IP address (the one of the customer)
> comes in. As we are running out of connection profiles, (only 31) we need
> to do this in Radius.
> I tried some pseudo-user routes, but it is not working.
>
> What I want to achieve:
> Customer A has a pipeline 50, IP adress 195.193.80.28/32 (and NAT). As
> soon as someone tries to connect to 195.193.80.28, the Max 4060 shoul
> dial out and establish the connection. With te connection profiles it
> works, but I need to do this in Radius.
> So, all information like route, ip address and callnumber needs to come
> from the radiusserver into the max.
>
> I tried the stuff below and update the Max so it read the config from the
> radius server, but the max does not dial out when trying to connect to
> 195.193.80.28/32.
>
> myuser-out Password="ascend", User-Service=Dialout-Framed-User
>         User-Name="iyellow",
>         Ascend-Dial-Number="0204210219",
>         Framed-Protocol=PPP,
>         Framed-Address=195.193.80.28,
>         Framed-Netmask=255.255.255.0,
>         Ascend-Metric=2,
>         Framed-Routing=None,
>         Ascend-Idle-Limit=20,
>         Ascend-Send-Auth=Send-Auth-PAP,
>         Ascend-Send-Secret="secretpwd"
>
> Can you please help me out with a radius example on how to achieve this?
>
> Thank you very much in advance
>
> Jan Ronken
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>

--
--------------------------
Dave Kirkpatrick
Communications Analyst
SCO Watford
Tel:- +44 (0)1923 813 628
Fax:- +44 (0)1923 813 868


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>