RE: (ASCEND) Dual IP on Max

["Troy Settle" <st@i-Plus.net>]

You could do this, but depending on the application, it could generate tons
of traffic on your ethernet.  For your radius stuff to work the way you
want, you'd have to swap the primary and secondary IPs.

I'd reccomend that you dump the /30, and have the ISP's ethernet port be the
gateway address for your /27.

x1/27 gateway (isp's router)
x2/27 max4k
x3/27 other
x4/27 other
...


> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Jerry O'Brien
> Sent: Wednesday, October 06, 1999 10:09 AM
> To: ascend-users@bungi.com
> Subject: (ASCEND) Dual IP on Max
>
>
> I have a Max 4K connected to my ISP via the ethernet port using a /30
> subnet. Can I use Dual IP to connect a /27 subnet to that port at the same
> time like this:
>
>   Max --- hub --- ISP (x.x.x.x/30)
>                    |____local hosts (y.y.y.y/27)
>
> ...or do  I need a separate router?
>
> If so, which of these addresses should be the main addr. of the box and
> which should be the 2nd Addr?
>
> I want the Max to use its y.y.y.y/27 address for RADIUS and
> logging. I have
> the main ethernet address set to that now, but it is sending the
> 2nd Addr to
> my RADIUS servers.
>
> Thanks,
>
>
> Jerry O'Brien
> Network Administrator
> Cutting Edge Systems, Inc.
>
>
>
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>