Re: (ASCEND) TNT: new 1-slot 56k modem cards

["Asnet Limited" <paulr@asnet.co.nz>]

We had a big problem with users who had LT Win modems when we upgraded to
7.2 on the TNT.  Alot of them couldn't connect until they installed the
lastest modem driver available which, incidentally, contained the fix which
was a bug with the LT Win (initially we thought it to be the TNT code
because these users were able to connect with the previous s/w that was
installed on the TNT).

Anyway, enough blabbing.
paul


-----Original Message-----
From: Andy Walden <andy@enigma.mtco.com>
To: Joe Pautler <pautler@grasshopper.cit.buffalo.edu>
Cc: Ascend Mailing List <ascend-users@bungi.com>
Date: Friday, 30 July 1999 09:52
Subject: Re: (ASCEND) TNT: new 1-slot 56k modem cards


>On Thu, 29 Jul 1999, Joe Pautler wrote:
>
>>
>> In order to be able to use the newer 1-slot 48port 56kbps modem
>> cards, is there a minimum requirement on the software version that
>> the TNT must be running?  If so, what is the oldest software rev
>> that is capable of supporting those cards?
>
>They are supported in the 7.x series, though I'm not completely sure about
>earlier ones. The cards don't work with the majority of cheap modems that
>are sold these days, so you will run into many problems. I have been
>asking for a fix for this for months, but they have pretty much blown it
>off. I'm pretty pissed about the whole deal really..
>
>Regards,
>Andy Walden
>
>
>--
>-----------------------------------------------------------------------
>Andy Walden                        Work Email: andy@mtco.com.
>Network Administrator,    Pers Email: andy@netimagination.com.
>MTCO Communications    Phone: (800) 859-6826
>  " Reality is just Chaos with better lighting. "
>
>
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>