Re: (ASCEND) Pipeline 130, memory problem?

["Dave Joyce" <Dave.Joyce@rtc1.com>]

Don't think it's 6.1.7 or the Full T-1.

I am using the same and my P130 has been running for over 54 days with this
as pools -v

Validating free lists...
0 errors; 18 buffers; 245376 bytes memory free

Must be something in the settings.

Dave Joyce

-----Original Message-----
From: Greg Keene <gkeene@pacificharbor.com>
To: ascend-users@bungi.com <ascend-users@bungi.com>
Date: Sunday, January 03, 1999 2:03 AM
Subject: (ASCEND) Pipeline 130, memory problem?


>I'm running a pipeline 130 on a FULL T-1. I have the latest firewall
>installed. I am running 6.1.7.
>
>I seem to be running out of memory. When I boot the Pipeline, my memory
>situation looks like this:
> > pools -v
>Validating free lists...
>0 errors; 8 buffers; 221568 bytes memory free
>
>After a while of running (a week or so), it will often degrade to something
>like this:
> > pools -v
>Validating free lists...
>0 errors; 6 buffers; 70464 bytes memory free
>
>In addition, when I run an application that causes significant DNS traffic
>(from our DNS to remote DNSs), it will slow to a crawl, and I can't login
>(telnet) and it usually disconnects my circuit. Often a reset (hard,
>because telnet is SO SLOW) will solve it, however it's quite consistent.
>
>Any ideas on how I can solve this?
>
>Thanks!
>
>Greg Keene
>---------------------------------------------------------------
>Pacific Harbor Publishing, L.L.C. http://www.pacificharbor.com/
>phone: 503/224-8218 toll free: 877/224-8218 fax: 503/296-2007
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>