Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pool summary not working, any ideas?
> Ok, I think I need to clarify... :)
> The C class network we're talking about is split into 8 subnets. One of the
> subnets used as a pool on the max is:
>
> 194.64.165.0/27 (255.255.255.224)
>
> The network address for this subnet is 194.64.165.0, the broadcast address
> is 194.64.165.32. That leaves a total of 30 useable pool addresses, the
^^31
> first one is 194.64.165.1, pool count is 30.
> Actually it's fairly simple, still the max won't announce the subnet when
> pool-summary is enabled. Maybe it has to do with the fact that we're using
> a .0 subnect here? If anyone thinks this might be the case, I'll try to
> "borrow" another subnet for temporary testing.
No, that is not the problem.
Do you have a static route for 194.64.165.0/27?
To use Pool summary, you need to define the pool, and you also need to
define the same range as a static route that goes into the reject
interface (127.0.0.2 = rj0).
-Phil
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: