Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pool summary not working, any ideas?
In article <Pine.LNX.3.96.980119085159.9882A-100000@digistar.com> you wrote:
[...]
>What i'm saying is the first subnet is not a valid subnet.
>194.64.165.0/24 and 194.64.165.1/24 are valid, where 194.64.165.1/27 isn't
>because its network mask is pointing to a /24 subnet, not a /27 subnet.
>194.64.165.30/27 isn't valid either, nor is 194.64.165.225/27.
Ok, I think I need to clarify... :)
The C class network we're talking about is split into 8 subnets. One of the
subnets used as a pool on the max is:
194.64.165.0/27 (255.255.255.224)
The network address for this subnet is 194.64.165.0, the broadcast address
is 194.64.165.32. That leaves a total of 30 useable pool addresses, the
first one is 194.64.165.1, pool count is 30.
Actually it's fairly simple, still the max won't announce the subnet when
pool-summary is enabled. Maybe it has to do with the fact that we're using
a .0 subnect here? If anyone thinks this might be the case, I'll try to
"borrow" another subnet for temporary testing.
--
Oliver J. Albrecht <oj@nexus.flensbone.net>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: