Re: (ASCEND) Max4000 and CRCs

["Neal Rigney" <neal@pernet.net>]

We had a problem a while back when the provisioning of our PRI's was not
_quite_ correct.  IIRC, our line was to hot AND the switch was set
incorrectly(SBC told me NTI, it was really NI-2).  Everything worked, but
every call connecting(both analog AND digital) got between 2 and 16 CRC's.

That'll teach me to trust SBC to install the PRI correctly the first time...
-----Original Message-----
From: Leon McCalla <ascend@caribbeanlink.com>
To: Mitch Harhay <mitch@bighorn.accessnv.com>
Cc: ascend-users <ascend-users@max.bungi.com>
Date: Thursday, January 15, 1998 7:39 PM
Subject: Re: (ASCEND) Max4000 and CRCs


>I raised a similar issue with this a while back.
>
>If a user with a bad BRI dials in, the max will show CRC errors even if the
>line is so bad that the user never connects. the problem is that on a 4004
>you won't know where the CRCs are coming from.
>
>Leon McCalla
>leon@caribbeanlink.com
>-----Original Message-----
>>We are running max4000's with 5.ap36 with both ISDN and analog users.
>>It seems that we are getting a lot of CRC errors on the boxes.  Is there
>>anythig that can be done to help prevent the CRC errors?
>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: (ASCEND) UDP port used for SNMP responses
• Next by Date: (ASCEND) NAT and snmp
• Prev by thread: Re: (ASCEND) Max4000 and CRCs
• Next by thread: (ASCEND) Re: Ascend OSPF?
• Index(es):
  • Main
  • Thread