Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Using Pipeline 50 to connect to ISP with single IP Address ?
Hi
I have an ascend Pipeline 50 I wish to use to connect a small network to an
ISP. There is no local server, DNS, DCHP or other protocol. At present
there is only one workstation on "my" network (which dual boots to either
NT4 or Win95) connected to a hub which is also connected to the Pipeline.
I'm using Demon Internet who are one of the biggest ISPs in the UK.
Model: P50-1SBRI-E
Software +5.1A+
S/N: 6175170
Demon can only provided me with ONE permanant I.P. Address but they tell me
I should be able to configure the Pipeline to use Address-Translation to
overcome this problem. However they cannot actually explain how to do this
!!
I have searched Ascends web site and downloaded several documents. Two
papers, The white paper "IP Routing 101" and "Configuring Your Pipeline50
ISDN For Internet Access" are both quite helpful but don't really deal with
using Address-Translation to deal with a single I.P. Address.
I have looked closely at the Pipeline Manuals but still find myself
blundering around. Although I have managed to get the ISDN self test to
work and can at least ping the pipeline.... Ok it's not much, but it's some
kind of progress.....
I'm certainly no networking guru (as u can probably tell) so if you know how
to do it I'd really appreciate some help, maybe a copy of your configuration
so I know who's addresses go where and what parameters are set ?
Many thanks
Guy
(guy@mail.org_REMOVETHIS)
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>