Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) Max Stacking and 5.0Ap38

You know, we haven't had reboot problems with OSPF and Stacking on p38.  We
_have_ had occasions(two so far) where the Max has just decided to not route
correctly.  It'll broadcast a /32 for a /27 or /28 subnet.  Very strange.
Rebooting clears it up.
-----Original Message-----
From: Joe Shaw <jshaw@insync.net>
To: Bob Dozier <rwdozier@apex2000.net>
Cc: ascend-users@max.bungi.com <ascend-users@max.bungi.com>
Date: Tuesday, January 13, 1998 11:23 AM
Subject: Re: (ASCEND) Max Stacking and 5.0Ap38


>5.0Ap16 was a very stable release for us.  We are running Max4000s with
>3-4 PRI with usually 2 for ISD and 1 or 2 for Analog.  We have ospf
>enabled and were stacking across chasis and the only problems we had were
>with USR modems, which is one reason why I upgraded some of our boxes to
>5.0Ap38.  However, you will see your boxes reboote within 3 days with OSPF
>and stacking turned on.  If you are just doing stacking, then you're
>mileage may vary, and I'd be interested to see how it works for you.
>
>Regards,
>Joe Shaw - jshaw@insync.net
>NetAdmin - Insync Internet Services
>Fortune for today: "Life may have no meaning -- or worse, it may have a
meaning
>of which you disapprove." Unknown.
>
>On Sun, 11 Jan 1998, Bob Dozier wrote:
>
>> I haven't seen much in the list about max stacking. I would like to
enable it
>> but I recall awhile back seeing something about it causing random
reboots.
>> We are currently running 5.0Ap16 on three Max 4000's and a 4048 without
>> stacking enabled and 5.0Ap16 has been very stable for us.
>>
>> Can anyone provide some information to make me feel comfortable moving
>> to 5.0Ap38 and/or enabling stacking?
>>
>>
>> Many thanks,
>> _______________________________________________________
>> Bob Dozier, Apex 2000 Internet Services Corporation
>>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>