Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Portable Remote Addr on Pipelines
We also wanted to have only a minimum of differences in the remote
configuration.
Therefore all the pipelines have the same private address. This will be
overwritten when the connection is established. They get an address out
of the maxens pool.
All users dial the same number, although the maxens are situated in
different locations: We have established a service number here in
Germany, which allows this (0180 ..)
We use NAT on the Pipelines, so that all the PC behind them can also be
configured identically.
The difference in the configuration is just the MSN and the paramter
myname.
Norbert Wegener
David Nochlin wrote:
>
> In an environment with many remote P75's calling in to a small
> number of Max's (currently one, but soon to be more) - I am
> trying to have as little hardcoded into the remote configurations
> as possible. Currently I'm battling with the remote address
> parameter. I would like to be able to a) change the IP addresses
> of our Max without changing the Remote Address parameter on
> the remote Pipelines b) callin to multiple Max's (again without
> the need to change the Pipelines Remote Address parameter).
>
> With 4.6C it was possible to use the remote address 127.0.0.2 on a
> P75 to accomplish what I want. I'm not quite sure why this works
> but it appears to. This doesn't work with 5.X however.
>
> Can anyone suggest the correct magic to do what I want? Any and
> all suggestions would be appreciated.
>
> Thanks,
>
> David
--
-------------------------------------------------------------------------
Norbert Wegener Fax : (49) 201 2661 768
SBS Essen Mail: norbert.wegener@rw.sni.de
Germany
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: