Re: (ASCEND) Max 6000 won't start

[nsupport@mail.idx.com.au (idx - nsupport)]

Hi,

I had a similar problem and ended up doing  "nindy" on the box.
Get hold of Ascend or their dealers for the instructions, it's worth a try.
By the way, moving the modem cards to other ports works.

best regards

At 03:54 PM 12/15/99 +0800, Geoff Hurst wrote:
>Hi All,
>
>I have a Max 6000 ready to install into a new POP. It worked last week just
>jim-dandy. It was operational with another ISP for a few months. I removed 2
>modem cards from it. It now has only 2 cards.
>
>I connect a serial cable to the console port, I power up the unit.
>
>I get this back...
>
>MAX6000 Boot PROM 1.4
>Trying main onboard flash load...
>get gzipped load...
>
>MAX6000 Boot PROM 1.4
>Trying main onboard flash load...
>get gzipped load...
>verify crc...
>............................................................................
>....
>........
>MAX6000 Boot PROM 1.4
>Trying main onboard flash load...
>get gzipped load...
>verify crc...
>............................................................................
>....
>........
>
>It will just keep cycling through this sequence without booting.
>
>Does anyone have any ideas on this?
>
>Geoff Hurst
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>