Re: (ASCEND) Single Slot modem card power req?

["francois.trudeau" <francois.trudeau@dslnet.com>]

I have a problem with ethernet ports on some of my Pipelines.  I was wondering
if anyone else here has seen this.

Our network has about 750 pipelines in it.  These are p130, adsl, and sdsl
pipelines, with about equal numbers of each.  On about a dozen or so, we are
having a problem with the ethernet port failing where it will still xmit but
will not recieve.  This is indicated by watching the ether stats when telneted
to the pipe.  If you reset the pipe, all is good.  The p130s we have are not
affected so far.  We are running 7.0.4 code on the sdsl and adsl pipes and
6.1.42 on the p130s.  This kind of indicates that there is a code issue
possibly, but not for sure.  Ascend tells me that the pipes may have problems
with some 10/100 hubs or switches because of the hub being flaky on the auto
negotioation.  I have surveyed what these things are plugged into and found a
mix of equipment, both 10 and 10/100, all with really nothing in common.

If any of you have had problems with the ethernet port on these Pipelines
freaking out when being plugged into certain equip, please let me know.  Any
info on what equipment was involved would be appreciated.

Thanks in advance.

Francois Trudeau
Senior Network Engineer
@link Networks


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>