Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Restricting login speed
I'm not sure but clients with v34 and k56 modems will not have difference in
speed on Max, because indicated speed of connection will 33.6 (upstream
speed). That's why you cannot restrict speed or restrict all Max's
connection must be made on speed not less then 33.6 (either protocol).
Best Regards,
Igor Tarasenko
System Engineer
INFOCOM GmbH
10 Volodymyrska St.,
Ukraine, Kiev, 252025
tel:+380 44 245 1822
fax:+380 44 228 7340
E-Mail: itarasen@ukrpack.net
X.400:g=Igor;s=Tarasenko;o=INFOCOM;a=Ukrmail;c=UA
http://www.ukrpack.net
-----Original Message-----
From: Joe Pautler <pautler@grasshopper.cit.buffalo.edu>
To: Ascend Mailing List <ascend-users@bungi.com>
Date: Wednesday, April 22, 1998 6:50 PM
Subject: Re: (ASCEND) Restricting login speed
>Igor Tarasenko wrote:
>]
>]Try to separate clients by means of Called ID attribute if you have
>]different numbers
>]fo K56 and V34 modems.
>]For Clients which use K56 define in Radius Profile one Called ID (DNIS)
for
>]V34 client
>]other.
>]Refer to Radius Configuration Guide 3-36
>]Best Regards,
>
>sure... but that doesn't solve our problem. we have a 500+ line v.34
string
>(not ascend gear). it is filled to saturation every night from
>7:30pm to 2am. we have added a small (soon to be much larger) k56flex
>string (using a 4048). the problem that we want to solve is that of
>v.34 users (in other words they do not have k56 capable modems) dialing
>into the 4048 and thus turning our K56Flex string into nothing more than
>an extension of our v.34 string. In other words, we want to use our
>4048 to exclusively serve users who have K56 capable modems.....but
>we have not found any way to prevent the modems in the 4048 from
>negotiating down to v.34.
>
>also, individual radius profiles are not practical.... we authenticate
>via a unix passwd file, which is linked to campus DCE, and supports
>about 50,000 users. pretty much everything is done with the radius
>default profile.
>
>
>]>as far as i know, you can only distinguish between async (v.34, k56, etc)
>]>and sync (isdn). we really wanted to limit our 4048 to not accept
>]>async calls at speeds less than 33.7kbps, in order to prevent v.34
>]>users from tying up all of our k56 modems (we have a seperate dial
>]>string for v.34 users). however we were told by ascend that this
>]>was not currently possible, but might be in the future....
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>