Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) "leaky" pools w/ 6.0.2?
Has anybody seen leaky pool behavior with 6.0.2 on
the MAX400x platform? I have converted a few terminal
servers over to 6.0.2 (to test) and have noticed that
the number of addresses allocated does not match
the number of users logged into the system.
For example, this output from one of our MAX boxes shows
13 sessions, several of which do not even uses addresses
from the pool, but sh pools gives 22 addresses in use.
Any clues?
ANCI: sh pools
Pool# Base Count InUse
1 208.146.102.1 62 22
Number of remaining allocated addresses: 0
ANCI: sh us
I Session Line: Slot: Tx Rx Service Host User
O ID Chan Port Data Rate Type[mpID] Address Name
I 260418964 1:1 4:7 14400 14400 PPP 208.146.102.13 eeedens
I 260417471 1:2 9:1 64K 64K MPP[16] 208.146.100.225tna
I 260419271 1:5 3:3 28800 26400 PPP 208.146.102.50 jacob1
I 260419093 1:7 9:4 64K 64K PPP 208.146.102.51 izzy
I 260418878 1:11 8:11 33600 31200 PPP 208.146.102.18 bnapier
I 260417481 1:12 9:5 64K 64K MPP[19] 208.145.43.225 shizznet
I 260419141 1:17 9:2 64K 64K MPP[19] 208.145.43.225 shizznet
I 260417484 1:15 9:8 64K 64K PPP 208.146.101.225sward
I 260417485 1:16 9:9 64K 64K MPP[20] 208.145.43.33 thepad
I 260419272 1:14 8:8 38000 26400 PPP 208.146.102.52 dragan
I 260419110 1:19 7:12 31200 24000 PPP 208.146.102.15 prompt
I 260419280 1:23 8:3 28800 28800 PPP 208.146.102.4 kritter
I 260419008 2:18 7:11 28800 28800 PPP 208.146.102.25 dcrabbe
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>