Re: (ASCEND) Max 6000 - setting 10BaseT?

[CDI Tech <scott@cdi.com.au>]

I am pretty sure I did try it however I thought it was used if you were
using 100mb...

Regards
Scott Stavretis
Connect Direct Internet
---- www.cdi.com.au ----

On Thu, 22 Apr 1999, John Coy wrote:

> The 6000s ship with an external "dongle" which
> accomodates older hubs which cannot auto-sense 10/100.
> 
> Have you tried using this dongle to connect to your
> older hubs?
> 
> 
> At 02:17 PM 4/22/99 +1000, you wrote:
> >
> >Peter,
> >
> >Ive had the exact same problems, replaced hubs and all is fine looking
> >forward to a *real* solution.
> >
> >Regards
> >Scott Stavretis
> >Connect Direct Internet
> >---- www.cdi.com.au ----
> >
> >On Thu, 22 Apr 1999, Peter Chow wrote:
> >
> >> Is it possible to set the Max 6000 ports to 10BaseT instead of 
> >> auto-sense?  Can you tell what it is set to from the user interface?
> >> 
> >> We have some 6000s that could not arp when connected to some older 
> >> 10BaseT hubs and switches.  Ethernet port is fine when we use a crossover.
> >> Replacing the hub was the only solution we can find.  I think it is
> >> an auto-sense problem of some sort.
> >> 
> >> --------------------------------------------------------------------
> >> _/_/_/ Peter Chow		Chief Technical Advisor
> >> _/_/_/ 				interQ Corporation - System Division
> >> _/_/_/ peter@interq.ad.jp	Shibuya Infoss Tower 10F
> >> _/_/_/ (tel)+81-3-5456-2555	20-1 Sakuragaokacho, Shibuya-ku
> >> _/_/_/ (fax)+81-3-5456-2556	Tokyo, Japan
> >> _/_/_/ http://www.interq.ad.jp	150-0031
> >> --------------------------------------------------------------------
> >> 
> >> ++ Ascend Users Mailing List ++
> >> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> >> 
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>