Re: (ASCEND) Max 6000 - setting 10BaseT?

[John Coy <jcoy@anc.net>]

The 6000s ship with an external "dongle" which
accomodates older hubs which cannot auto-sense 10/100.

Have you tried using this dongle to connect to your
older hubs?


At 02:17 PM 4/22/99 +1000, you wrote:
>
>Peter,
>
>Ive had the exact same problems, replaced hubs and all is fine looking
>forward to a *real* solution.
>
>Regards
>Scott Stavretis
>Connect Direct Internet
>---- www.cdi.com.au ----
>
>On Thu, 22 Apr 1999, Peter Chow wrote:
>
>> Is it possible to set the Max 6000 ports to 10BaseT instead of 
>> auto-sense?  Can you tell what it is set to from the user interface?
>> 
>> We have some 6000s that could not arp when connected to some older 
>> 10BaseT hubs and switches.  Ethernet port is fine when we use a crossover.
>> Replacing the hub was the only solution we can find.  I think it is
>> an auto-sense problem of some sort.
>> 
>> --------------------------------------------------------------------
>> _/_/_/ Peter Chow		Chief Technical Advisor
>> _/_/_/ 				interQ Corporation - System Division
>> _/_/_/ peter@interq.ad.jp	Shibuya Infoss Tower 10F
>> _/_/_/ (tel)+81-3-5456-2555	20-1 Sakuragaokacho, Shibuya-ku
>> _/_/_/ (fax)+81-3-5456-2556	Tokyo, Japan
>> _/_/_/ http://www.interq.ad.jp	150-0031
>> --------------------------------------------------------------------
>> 
>> ++ Ascend Users Mailing List ++
>> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>> 
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>