RE: (ASCEND) Switching to Ascend MAX

["Yasin KAPLAN" <kaplan@intrakets.com.tr>]

Hi,

Just enter a space character in receive password. Because
you enable receive-authentication in Ethernet/Answer/PPP options,
Max enables receive passwd option in connection profile/encap options.
By the way... What is th speed of you leased line connection?
if it is different than 64k, let's say 256K, you should define it exactly
in Swan profile...

Yasin KAPLAN - INTRAkets
Teknik Mudur - Technical Manager
Tel:+90 (216) 3276930 Ext. 116 Fax: +90 (216) 3276924
http://www.intrakets.com.tr/ kaplan@intrakets.com.tr

> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Sergio Santos
> Sent: Tuesday, April 20, 1999 12:46 PM
> To: ascend-users@bungi.com
> Subject: (ASCEND) Switching to Ascend MAX
>
>
> Hi all,
>
> I'm having quite a hard time switching from our Livingston
> Portmaster 2eR to
> a MAX 4030(2 PRIS).
>
> I'll be using the PRI's for dial-in only (hunt group), and the serial wan
> port for connection to our leased line to the NET.
>
> I haven't yet began to configure the PRI's, but for now I need to have the
> portmaster answering/authorizing calls and routing them to the
> MAX that then
> will route to the internet through the leased line.
>
> My understanding of the configuration menus is still on the novice level,
> but I need to put the MAX connected to our leased line here ASAP.
>
> It's a "plain PPP" leased line at 64K, I have configured the Wan port for
> 1K*64, activation Static and Nailed Group 3...
> There's no auth of any type, I tried to make a connection in the
> Ethernet->Connections profile but it won't let me save the parameters
> because it must have a recv PW (I can disable Send PW but not recv PW) in
> the Encaps options.
>
> I have the Maxxen connected to the telco DSU unit via a v35 cable
> (much like
> the Portmaster).
>
> Searching through the manuals I only see examples for Serial Wan
> port Frame
> Relay connections, so I'm stuck.
>
> Anyone can help me? Am I missing something really stupid?
>
> Many Thanks,
>
> Sergio Santos,
> ssantos@netlandia.pt
>
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>